Product Description
Built to cover the user that does it ALL; the armorer, the gunsmith, the range owner, the competition shooter, and firearms aficionados. Nearly every tool that FIS makes is packed into one indestructible waterproof Nanuk® hard case. This won’t fit in your pocket like our other kits, but is still go anywhere ready weighing in under 10lbs and measuring 13” wide x 11” tall x 6.5” deep. The organized selection covers all of your general needs in bits, cleaning tools, and punches. No platform or accessory are overlooked with specialized tools for AR’s, battery doors, Glock®, Sig Sauer®, & Shotguns. Torque tools are available in options of both All-In-One Drivers (All-In-One Torque Driver 15-65 inLbs & Mini All-In-One Torque Driver 6-25 in-Lbs). The Pro Armorer’s Toolkit is the ultimate on-the-go gunsmithing resource.
Each Pro Armorer's Toolkit also includes:
- Ratchet T-Handle w/Locking Hex Drive
- Extension/punch holder
- 1/2” Socket/Adapter
- Shotgun Choke Wrench
- 1911 Bushing Wrench
- Spring Tool
- E2 Slide Punch
- Grip Screw Bit
- Sight tool for Glock®
- Mag Tool for Glock®
- Channel Remover for Glock®
- Channel Installer for Glock®
- Brass Hammer Head
- Bolt Group Scrapers (.223, .308)
- Castle Nut Wrench
- A2 Sight Adjuster
- Extractor Tool (.223, .308)
- Pivot Pin Tools (AR10, AR15)
- Bolt Catch Pin Punch
(With Nylon Surface Protector) - Non-marring Plastic Pin Punch
- Remington® 700 Bolt Opener
- Steel Pick
- Mini Pry Bar
- Bronze Scraper
- Set of two 8-32 adapters
- 3 Cleaning Brushes (Nylon Medium and Hard Bristle & Bronze Hard Bristle)
- Aimpoint® Bit
- Battery Cap Tool Coin Slot Battery Cap Tool
- 3/8” Adjustment Wrench
- Scope Jack
- Machined Aluminum Bubble Level Set Magnetic level & rail clamp level/anti-cant device with precise UK-sourced bubble vials
- Cleaning Rod/Bore Obstruction Kit
• Six precision machined stainless steel rods (8-32 thread)
• Six .22 caliber brass bore adapters
• Six .30 caliber brass bore adapters
• Six 6.5 Creedmoor caliber brass bore adapters
•.22 caliber obstruction tip
•.30 caliber obstruction tip
• 6.5 Creedmoor caliber obstruction tip
• Double ball bearing drive adapter
• Small Parts Holder
• Carrying Case - Magnetic Tray
- Bench Block
- Large Parts Holder
- 4 Medium Parts Holders
- Steel Pin Punch set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4)
- Brass Pin Punch Set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4)
- Roll Pin Punch Set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4)
- Roll Pin Starter Punch Set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4)
- 40 Electroless Nickel Plated Bits (1” in length):
Hex: 2x 0.050”, 2x 1/16”, 2x 5/64”,, 7/64”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 2x 1.5mm, 2x 2mm, 2x 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm
Screwdriver: 2x PH0, PH1, PH2, 2x 3/32”, 3/16, 1/4
Torx: 2x T6, T8, T10, T15, T20, T25, T27, T30 - 24 Electroless Nickel Plated Bits (2” in length):
Hex: 5/64”, 3/32”, 7/64”, 1/8”, 5/32”, 3/16”, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm Screwdriver: PH1, PH2, PH3, 4mm, 5mm, 6mm
Torx: T10, T15, T20, T25, T27, T30 - 6 Extended Action Bits (4” in length):
Hex: 5/64”, 1/8”, 5/32”, 5mm
Torx: T30 - Nanuk™ 905 Waterproof Case w/ laser cut foam insert organizers
• Waterproof (IPX7) • Dust proof (IP6X) • MIL-SPEC certified
